Economical spacer between two reinforcement layers for export

The spacer strip ecoDS is a universally applicable spacer in the form of a flat lattice framework that is bent out of the plane in the shape of a sine curve. The spacer strip ecoDS is the economical alternative to the standard spacer strip hqDS in the height range from 40 mm to 200 mm.

Spacer strip ecoDS

Benefits

  • Tilt-proof stability
  • No foreign body in concrete
  • Lightweight
  • Design in conformity with German DBV guidelines
    (DBV leaflet “Chairs according to Eurocode 2”: FRd = 0.67 kN/m)
  • Increased stability due to big wire diameters
  • Structural bearing of shear forces
  • Easy length adjustment by bending
  • For bar reinforcement and for wire fabric reinforcement
  • Slender truss system

Spacer strip ecoDS

Application

Spacer strip ecoDS

Types

Type Height
cm
Bundle
Small bundle Large bundle Pallet
ecoDS 04 4 25 1000 2000
ecoDS 05 5 25 500 1000
ecoDS 06 6 25 500 1000
ecoDS 07 7 25 500 1000
ecoDS 08 8 25 500 1000
ecoDS 09 9 25 500 1000
ecoDS 10 10 25 500 1000
ecoDS 11 11 25 500 1000
ecoDS 12 12 25 500 1000
ecoDS 13 13 25 500 1000
ecoDS 14 14 25 500 1000
ecoDS 15 15 25 500 1000
ecoDS 16 16 25 500 1000
ecoDS 17 17 25 500 500
ecoDS 18 18 25 500 500
ecoDS 19 19 25 500 500
ecoDS 20 20 25 500 500

Weight and dimensional tolerances comply with the DBV Leaflet “Chairs according to Eurocode 2”

Spacer strip ecoDS

Installation / Placement

For the placement of spacer strips ecoDS, a distance of approx. 0.50 m between strips is recommended. This corresponds to approx. 1 strip per m² of top reinforcement. In case of thicker top reinforcements, it is possible to widen the pitch between strips.

Spacer strip ecoDS

Gallery

Spacer Strip ecoDS

Downloads

Date issue 10/20

Version 05/22

Continue to the download page